Doepfer A155 Trigger Sequencer

RobertSyrett

http://www.doepfer.de/a100_man/A155_man.pdf

This should also be pretty easy to do in Audulus.

RobertSyrett · Screen Shot 2018-04-13 at 12.53.53 PM.png

Here is the guts of one of the top rows. Toggling the the midi trigger nodes in the mux 8 node will switch between the top output, which has a fixed length, and the bottom output, which has the length of the gate that the clock signal had.

RobertSyrett · Screen Shot 2018-04-14 at 12.28.02 AM.png

Here's a prototype. Should be enough to play with though.

Zenmaster7

Works neat. Some good possibilities with this.

Paulinko

Here’s my take on your first post in the thread.

Paulinko

Here’s synth I came up with based upon the work @RobertStyrett did initially. There’s a lot of modulation sources and the patch always creates sound when the output power is toggled on. It has a drone effect. You can play it in MIDI monophonic legato mode. The frequency of the oscillators and the patch in general are changed by setting the frequency with the knob in the module at the top in the middle of the patch. The two sets of 8 buttons are used to generate the waveforms for the modulation sources. Be aware that you may cancel out things depending upon the sequences you choose.

Paulinko

I will have to investigate keyboard tracking, chords, and other elements to create a patch that’s more than interesting tones.

Paulinko

Here’s a version of the synth with keyboard tracking.

RobertSyrett

@wiwandertitan

Howdy, Stranger!

Categories