More LFO questions
  • I'm sure this is out there somewhere and I over looked it, but here goes. I'm working on a patch that is using several delays. I split the input into four paths, sending one directly to the in on a 4x1 mixer, the next to three delays in series, the third into a pitch shift, then into three delays in series, and the last into a filter, one delay, then to the mixer. I used an OSC as an LFO to control the frequency parameter of the filter. What I need to know is; how do I create a logic function that keeps the frequency from going into the negative numbers?
  • Is this what you mean?
    image.jpg
    2048 x 1536 - 244K
  • I don't know, I don't see anything.
  • I looked at my previous post about LFOs, turns out the problem I had last time may be the solution this time.
  • #BigDaddyBri
    Arcane wants you to notice (x+.5) which changes a sine wave's range from (-.5 to .5 ) to a range of (0 to 1)
  • Ah ok, at first, I couldn't see the picture, and when I looked at it on my computer, it was too small, but I see what you mean now. Thanks.